Max RB397 Specifications download pdf (Page 7)

8

16This charger is not intended for use by

children or disabled persons without

supervisor.

17Children should be supervised to en-

sure that they do not play with the

charger.

18Put a pack cap on the terminal of the

Battery pack

When the Battery pack is not in use, put a

pack cap on its terminal to prevent short

circuits.

19Do not let the terminal (metal compo-

nent) of the Battery pack short-circuit

A short circuit in the terminal will generate

a large current, causing to overheat the

Battery pack and become damaged.

20Do not leave or store the tool in a vehi-

cle or in direct sunlight during sum-

mer. Leaving the tool in high

temperature conditions may cause the

battery pack to deteriorate.

21Do not store a fully discharged battery

pack. If a fully discharged battery pack

is removed from the system and left for

a long period of time, it may become

damaged. Recharge the battery imme-

diately when it has been discharged.

18. WEAR SAFETY GLOVES WHILE OPER-

ATING THE TOOL

The finish tie has sharp edges. To avoid seri-

ous injures, be careful not to touch the sharp

edges. MAX recommends wearing OSHA

approved safety gloves while operating the

tool.

2. SAFETY FEATURES

In order to ensure safety during operation, the

RB397 has the following safety features.

• Prior to using the tool, make sure that the

safety features function properly. If they do

not, avoid using the tool.

Trigger Lock

The Trigger can be locked preventing the tool

from operating for safety. Always keep the Trig-

ger locked when not in use.

Unless you are at tying work, set the trigger lock

to the position of LOCK and remove a battery

pack. When you start tying work, set it to the po-

sition of UNLOCK.

Pull to the left slightly and upwards to UNLOCK.

WARNING

Trigger

Trigger Lock

1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

Comments to this Manuals

No comments