Max SN883CH/34 Specifications download pdf (Page 7)

2. SPECIFICATIONS AND TECHNICAL DATA

1. NAME OF PARTS

Frame

Cylinder Cap

Contact Arm

Nose

Magazine

Trigger

Grip

Exhaust Cover

Pusher

Adjustment Dial

PRODUCT NO. SN883RH SN883CH/34 SN883CH/28

HEIGHT 11-7/8˝ (300 mm) 12-1/4˝ (310 mm) 12-1/4˝ (310 mm)

WIDTH 4-3/4˝ (121 mm) 4-3/4˝ (121 mm) 4-3/4˝ (121 mm)

LENGTH 20-3/4˝ (526 mm) 18-1/8˝ (460 mm) 16-7/8˝ (428 mm)

WEIGHT 7.0 lbs. (3.2 kg) 6.8 lbs. (3.1 kg) 7.0 lbs. (3.2 kg)

RECOMMENDED

70 to 100 p.s.i. (5 to 7 bar) 70 to 100 p.s.i. (5 to 7 bar) 70 to 100 p.s.i. (5 to 7 bar)

OPERATING PRESSURE

LOADING CAPACITY 64 Nails 90 Nails 90 Nails

AIR CONSUMPTION

0.077 ft

at 90 p.s.i. (6 bar) 0.077 ft

at 90 p.s.i. (6 bar)

operating pressure operating pressure operating pressure

PRODUCT NO. SN883RH SN883CH/34 SN883CH/28

NAIL LENGTH 2˝ to 3-1/4˝ (50 to 83 mm) 2˝ to 3-1/4˝ (50 to 83 mm) 2˝ to 3-1/4˝ (50 to 83 mm)

SHANK DIAMETER .113˝ to .148˝ (2.9 to 3.8 mm) .113˝ to .131˝ (2.9 to 3.3 mm) .113˝ to .131˝ (2.9 to 3.3 mm)

SHANK TYPE Smooth, Ring, Screw Smooth, Ring, Screw Smooth, Ring, Screw

HEAD DIAMETER .267˝ to .295˝ (6.8 to 7.5 mm) .256˝ to .303˝ (6.5 to 7.7 mm) .256˝ to .303˝ (6.5 to 7.7 mm)

COLLATION ANGLE 21 degree 34 degree 28 degree

HEAD Full round head Clipped head Clipped head

2. TOOL SPECIFICATIONS

TOOL AIR FITTINGS:

This tool uses a 3/8˝ N.P.T. male plug. The inside diameter should be .39˝ (9.9mm) or larger. The fitting must be capable of

discharging tool air pressure when disconnected from the air supply.

RECOMMENDED OPERATING PRESSURE:

70 to 100 p.s.i. (5 to 7 bar). Select the operating air pressure within this range for best fastener performance.

DO NOT EXCEED 120 p.s.i. (8 bar).

3. FASTENER SPECIFICATIONS

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

No comments

Max SN883CH/34 Specifications Page 7